New EAM 4600 200C Shorty
The discharge curve looks very good. The best shorty I’ve had so far. To put it into perspective: The “worst” Lipo had 7.16V after 5 …
Associated RF74 1.5 Carpet Setup March 2024
The stock car is now based on a RF74 Chassis instead of PSM HTC. It is modded to accept a B74.2 rear bulkhead and a …
Team Associated B74 HT0 Steering block arms – a fail?
The use of HT0 steering arms created more problems than they fixed. First of all, if there has been a issue with steering ballcups rubbing …
Associated B74.1 Carpet Setup Pt.2
This time, on a gradually tighter and more technical track, i tested the +2 and +1 arms, ending up with the +1 arms as the …
Associated B74.1 Carpet Setup
This Setup is derived from a well working carpet setup for rather small, tight tracks. The only change made for a mid sized track with …
New Intellect Pioneering 4800 LCG Lipo
As a couple of my lipos recently died (not excatly died but if a cell goes beyond 15 mOh i consider it dead because it …
B74.1 / B74.2 Front shock tower comparison
The shock mounting position went down further more, almost to the level of the Revolution Design LCG shock tower. The Revolution Design holes are left …
Front Rim rubbing on steering ballcup / HT0
Ever since i started with the B74, there was an issue withe rims rubbing on the ballcup of the steering arm. All Ballcups looked more …
B74 / B74.1 Battery holder from race-factor.de
I just installed an alternate battery holder from race-factor.de. I hope that this part will make it easier to switch between full size and lcg …
Weigt of Associated B74 / B74.1 carbon and composite parts
Arms:Rear 15.4 14.06 1.34 x2 = 2.68Front 13.6 12.3 1.3 x 2 = 2.6That makes 5.28g for a set front and rear. Gear box without …